Vaporizer
Vaporizer
Vaporizer
Requires:
Activate on breath
Maxiumum diameter 3/4 in.
Maximum length 6 in.
Standard 510 Cartridge
(10 or 10.5mm)
Slide
Vaporizer
Vaporizer
Slide your vaporizer through the center hole until retained by the O-ring.
Align
Vaporizer
Align
While aligning the base indicator and lid aligment box, insert the lid into the base.
Twist
Vaporizer
Align
Twist the lid right tighty to tighten the base to the bottle like any other bottle.
Twist the lid (lefty loosy) to loosen the base from the bottle.
Twisty Lid Modes
Pull
Install/Remove
Install/Remove
When the lid is fully twisted counterclockwise (0 degrees) and the indicator is aligned with the full circle (Pull mode).
Install/Remove
Install/Remove
Install/Remove
When the indicator is in the lid alignment box (45 degrees), the lid/vaporizer can be installed or removed.
When the indicator is out of the lid aligment box, the lid is locked to the base.
Clear
Install/Remove
Clear
When the lid is fully twisted clockwise (90 degrees), and the indicator is aligned with the empty circle (Clear mode).
How it works
1. Pull
3. Repeat
2. Clear
With your vaporizer installed, twist the lid to the "Pull" position then inhale on the mouthpiece. This will draw fresh air through your vaporizer charging your bottle with vaporized product (orange).
Pull until the desired amount of product is in the bottle. Multiple breaths can be used to charge your TOBY.
2. Clear
3. Repeat
2. Clear
Twist the lid to the "Clear" position then inhale on the mouthpiece. This draws fresh air (blue) directly into your bottle pushing all stored vapor though the mouthpiece.
Clear your TOBY by taking sips for moderate consumption, or big clears for heavy consumption. Consume at a rate that is comfortable for you.
3. Repeat
3. Repeat
3. Repeat
Repeat steps 1 and 2 until the desired amount of product is consumed.
Remember to remove all liquids from your TOBY when finished, and always use responsibly.
Cooling and Filitering
Air
Ice Bath
Water
Cools
Comforts
Low noise
Water
Ice Bath
Water
Cools More
Comforts
Filters
Ice Bath
Ice Bath
Ice Bath
Chills
Comforts
Filters
Ice Cave
Ice Bath
Ice Bath
Chills Most
Comforts
Low Noise
FOR best Experience
Vaporizer Check
Vaporizer Check
Vaporizer Check
Check your vaporizer that it is charged, has product, free of clogs, and activate on pull is working before use.
Keep Upright
Vaporizer Check
Vaporizer Check
Keep your TOBY upright. Gravimetric seals prevent spills, but not leaks.
Keep Clear
Vaporizer Check
Keep Clear
Do not cover the clear vent hole (the "O" in your TOBY lid).
No Shaky
Vaporizer Check
Keep Clear
Do not shake or blow into your TOBY to prevent damage to your vaporizer.
MaintEnance
Washing Your TOBY
- Wash your TOBY before first use and after every use.
- Using dish soap, run soapy water through the center of your disassembled TOBY base for 10 seconds. Repeat for the 5 holes in your disassembled TOBY lid and bottle
- Rinse your disassembled TOBY clean, and air dry.
- Hand wash and air dry only, not dishwasher safe.
Storage
- Store out of direct sunlight
- Store dry when not in use, do not leave liquid in your TOBY
O-rings
- TOBY has six O-rings. Replace an O-ring if it is damaged, broken, worn, or lost. Inspect the O-rings before each use.
- TOBY lid O-ring (x5) : 2.4mmWD 9.8mmID Buna-N
- TOBY base O-ring (x1) : -225 Buna-N
A couple more things
- Water only, do not use with food or beverages
- Recycle Your TOBY
Lid and Base: PETG
Bottle: BPA free PS
O-rings: Buna-N
- Do not use with combustibles
- Please use responsibly